Bearings, Power Transmission and Electrical Controls to Maintain Or Upgrade Your Kilns, Live Decks, Log Troughs, Log Turners, Rollcases, Debarkers, Stackers, Chain Transfers, Unscramblers AND MUCH MORE.

Check out this Timken® Split Cylindrical Roller Bearing Housed Units installation at one of our lumber customers. The Timken® split cylindrical roller bearing housed unit maximizes uptime. They are also easy to install and quick to maintain. When replacing trapped solid SN/SD/SAF housings, a split unit can reduce installation time up to 90%. See more information below in the bearing section.

Need Assistance? Contact Us Today For All Your Lumber Needs!

Click here


Timken Super II® Debarker Belts

The Timken Super II belt has greater strength, longer life, better heat dissipation, better grip for controlled slippage, greater flexibility. Timken has designed this belt for the toughest, heavy-duty industrial applications. For more information on Super II belts, click here.

Fenner PowerTwist Wedge Belts

PowerTwist SPA Wedge Belting is engineered to handle the stresses of this demanding application. Belt life is expected to exceed 2 years. After the initial run-in period, PowerTwist does not require retensioning, thus avoiding expensive maintenance costs. For more information on PowerTwist Wedge Belts, click here.


Roller Chain

Titan® chain integrates the latest advancements from Tsubaki’s research and development to increase the wear life of roller chains in high speed and harsh environments. Titan® chain incorporates the best features of Tsubaki’s standard ASME/ANSI chain coupled with new and unique features that will outperform competitors’ extended life chains. For more information on Tsubaki’s Titan chains, click here.

Sharp Top Chain

Sharp Top Chains from Tsubaki are designed to operate longer in your operation. Straight sidebars provide additional strength and heat-treated side plates protect against wear fatigue cracking in high-speed applications. Sizes 80 and larger feature patented lube groove bushings, which hold oil, minimizing pin/bushing wear and extending chain life. For more information on Tsubaki’s Sharp Top Chain, click here.


Torque Limiter Sprockets

The Torque Limiter Sprocket works by transmitting torque via two composite friction disks, which are compressed by disk springs against the ground face of the hardened tooth sprocket. The end-user sets the torque limit by tightening the adjusting nut on the device. Click here for more information on Torque Limiter Sprockets.

Split Sprockets

Drum Sprockets

Titan® chain integrates the latest advancements from Tsubaki’s Tsubaki now offers drum sprockets and complete shaft assemblies with the same quality and support you have come to expect from all of our Power Transmission & Motion Control products. Click here for more information on Drum Sprockets.

Smart Tooth Sprocket

TSUBAKI SMART TOOTH® sprockets offer users the ability to identify and schedule drive system maintenance before critical component failure occurs. Strategic placement of Tsubaki’s patented Wear Indicator pins on one or more sprocket teeth provides visual indication that a sprocket is still within the allowable wear tolerance, or that it needs to be replaced. For more information on Tsubaki’s SMART TOOTH® sprockets, click here.


Keyless Locking Bushing

Tsubaki POWER-LOCK® has high durability against reversing or impacting loads. The POWER-LOCK connection is not affected by tortional load reversal or impact, which damages the key and keyway connection. U.S. Tsubaki POWER-LOCK fits tightly around the shaft/hub and is free of backlash. The POWER-LOCK offers 360-degree angular adjustment and is excellent for indexing tables, cam mechanisms, gear drives and double-strand conveyor sprockets. The U.S. Tsubaki POWER-LOCK can hold axial forces, too. The POWER-LOCK can be assembled and disassembled frequently, so maintenance or replacement of worn parts is simple and easy as compared to other methods. By using the POWER-LOCK, no metal needs to be removed from the shaft (such as the cutting of a keyway). The strength of the shaft can be kept at its original diameter. This savings can be especially noted on hollow-shaft applications. There is no need for time-consuming machining of keyways. The POWER-LOCK offers substantial savings on long, heavy shafts. For more information on U.S. Tsubaki’s POWER-LOCK, click here.


SnapIdle Chain and Belt Tensioners

SnapIdle Free Floating Chain Tensioner is durable and versatile. Snapidle chain tensioners are now 100% Stainless Steel & UHMW (plastic) making them suitable for all applications especially food handling equipment, moisture environments and more.


Regal Sealmaster Mounted Bearings

Sealmaster® are a high quality mounted bearings offering that includes the Sealmaster Gold Line. Choose from a broad selection of stock sizes. Sealmaster bearings products are also available in a wide selection of custom designs. Click here for more information on Regal Sealmaster’s Mounted Bearings.

Regal Sealmaster RPB Mounted Bearings

Sealmaster®  RPB series features rugged split cast-iron housings and cartridge inserts. The inserts are field replaceable, therefore simplifying mounting and maintaining maximum uptime. The bearing cartridge is designed to compensate for +/- 3 degrees static misalignment. The felt lined seals, mounted between the races, act like a filter, and the rotating flinger helps repel contamination buildup on the seals. While the seals help prevent contaminants from entering the bearing, the positive lubrication system allows direct grease flow into the bearing. For more information on the RPB series, click here.

Timken Steel Solid Block Housed Units

Timken® spherical roller bearing solid-block housed units are designed for the challenging circumstances. Made with cast-steel housings and Timken high-performance spherical roller bearings, these are the only spherical roller bearing housed units to offer steel solid-block housings as standard. For more information on the Timken Steel Solid Block Housed Units, click here.

Timken® Split Cylindrical Roller Bearing Housed Units

Timken® split cylindrical roller bearing housed units maximize uptime. They are easy to install and quick to maintain. When replacing trapped solid SN/SD/SAF housings, a split unit can reduce installation time up to 90%.

The split-to-shaft feature makes installation and maintenance simple and fast. The SNQ / SAFQ pedestal type can further reduce downtime dramatically. It slides under the shaft eliminating the need to lift it and remove a drive to install a bearing. To learn more about the split cylindrical roller bearing, click here.

Dodge Extreme Duty Mounted Bearings

The Dodge Extreme duty mounted ball bearing offers extended life in the toughest industrial applications. Incorporating patented Dodge-only features such as the QuadGuard sealing system and the Maxlife ball cage, the Dodge Extreme duty bearing outperforms the competition in demanding environments where increasing equipment uptime is critical to success. Extreme conditions require highly engineered products that will last. For more information on the Dodge Extreme Duty Mounted Bearing, click here.

Dodge Mounted Babbitt and Bronze Bearings

  • Good for slow to medium and shock loads
  • Good for slow speeds and shock loads
  • Capable of MPTA load ratings
  • Cast-iron housings in 2- and 4-bolt pillow blocks
  • Babbitted bearing features solid or fully split housing
  • Bronze bushed bearing features fully split housing
  • Bronze bushing is split and easily replaced

Click here for more information.

Schaeffler Open Bearings

Single-row deep groove ball bearings are available in open and sealed designs. They are designed for high to very high speeds and can accommodate radial as well as axial forces.

Double-row deep groove ball bearings correspond with single-row deep groove ball bearings in design and are used when the radial load capacity of single-row deep groove ball bearings is insufficient.

FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads. For more information on the Schaeffler’s Open Bearings, click here.

Electric Motors

EBI Dry Kiln Duty Motor

Since 1995, EBI has designed and manufactured dry kiln duty electric motors that can withstand extreme environmental conditions imposed by lumber dry kilnsWith EBI high temperature dry kiln motors. For more information on EBI’s dry kiln motors, click here.


With cast iron frame, flexible mounting, solid and whole feet, and lower noise levels and operating temperatures, the W22 motors are suitable for a great variety of industrial applications. To learn more about the WEG W22 motor, click here.


TOSHIBA was one of the first to bring high-efficiency motors to the world, establishing a manufacturing base in Vietnam in 2009. TOSHIBA motor’s technology has achieved world-leading energy efficiency. Click here for more information on Toshiba motors.


The Baldor-Reliance extensive line of General Purpose three phase motors are available in totally enclosed cast iron and industrial steel band for harsh applications. These motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges. For more information on Baldor’s motors, click here.

Hyundai Crown Triton™ IEEE–841

Hyundai IEEE-841chemical and process motors are designed and field tested for some of the harshest industrial environments. These premium efficiency motors are fully compliant with the IEEE-841(2009) standard and carry ABS Type Approval and a full 5 year warranty. Click here for more information. For more information, click here.


Cone Drive Gearbox

Cone Drive’s Series B gearboxes and gear reducers provide an economical, flexible, and compact solution to fulfill the low-to-medium power range requirements. With capabilities up to 20HP and output torque up to of 7,500 lb in. in a single stage, Series B can provide design flexibility with lasting performance.

SEW Helical-Bevel Gear Units

With their high efficiency in both directions of rotation and at any input speed, these right-angle gear units are very energy-efficient. Their high-endurance gearing is wear-free and lasts a gear unit’s lifetime. For precise positioning tasks, you can use the K series gear units with reduced backlash.

Grove Ironman

Designed for performance and long life with a stress-free service, the Regal Grove Ironman is assembled to order for short lead times, expedited delivery service available, 1.33 to 10” center distances, single and double reduction configurations and Cast iron, Aluminum and stainless steel housings. To learn more about the Grove Ironman, click here.


Duff Norton Kiln Louver Actuators

Duff-Norton manufactures a broad range of high capacity electric linear actuators, supercylinders and screw jacks.


Yaskawa Micro Drive

Sustainability, flexibility and ease of use are all designed into the drive, helping you make complicated tasks simple. Offering intuitive interaction and world-class quality, the GA500 is the drive you can count on
for constant, high quality performance. Make your day easier and leave more time for other tasks by trusting the GA500 from Yaskawa. To learn more about Yaskawa’s Micro Drives, click here.

Yaskawa Fan and Pump Drive

The P1000 drive provides simple, reliable, cost-effective control for variable-torque loads through 1000 HP. Specific application features, energy savings, and network connectivity make the P1000 a great choice for industrial fans and pumps. Click here to learn more about Yaskawa’s Fan and Pump Drives.

Electrical Components

Red Lion Temperature Control, Metering, Display

From single to multi-point control, Red Lion has the right PID controller for any application. Red Lion provides a wide range of proportional integral-derivative (PID) controllers that are rugged, reliable and easy to deploy. Our PID controllers offer industry-leading features and reliable performance designed for the most demanding applications.

Red Lion HMI Operator Interfaces

Red Lion Controls offers a comprehensive array of HMI operator panels to address the varying requirements found within the industrial automation space. With a full spectrum of indoor and outdoor models ranging in size from 4” through 15” touchscreens, our HMIs give organizations the ability to select exactly the functionality they need to connect, monitor and control operations. To learn more about Red Lion’s HMI Operator Interfaces, click here.

Eaton Sensors and Limit Switches

Eaton’s E50 modular plug-in limit switches are the industry standard with versatility of design and high reliability for low maintenance, installation and inventory costs. Standard Viton gaskets, seals and boots and a zinc die -cast enclosure provide exceptional chemical resistance to the common coolants, cleansing agents and hydraulic fluids found in machine tool, automotive, wastewater treatment and other heavy-duty industrial applications. Mounting dimensions accommodate both U.S. and DIN standards for easy retrofit installations. Super bright 24 – 120 Vac/Vdc LED indicating light versions simplify setup and troubleshooting operations. For more information on Eaton’s E50 switch, click here.

Eaton’s E58 harsh-duty series sensors are among the most rugged and best-sealed photoelectric sensors. Stainless steel, PVDF and tempered glass components are mechanically assembled using Vitron seals to ensure resistance to chemicals and moisture intrusion. These sensors withstand heavy shock and vibration while providing unparalleled optical performance. For more information on Eaton’s E58 harsh duty sensors, click here.

Pepperl+Fuchs Proximity Sensors

Inductive proximity sensors are the preferred choice for the majority of applications requiring accurate, non-contact detection of metallic objects in machinery or automation equipment. As a pioneer and market leader, Pepperl+Fuchs offers innovative, high quality inductive sensors to meet the needs of the worldwide automation and process control markets.

Capacitive sensors can be used to detect metal objects as well as nearly all other materials. These sensors are often used in applications including level, flow control for detection of liquids, grains and powders.

Magnetic field sensor selection consists of the M12 housing style for traditional magnetic detection applications. Also offered is a non-contact, piston detection sensor for use with steel hydraulic cylinders. These magnetic sensors offer reliable piston magnet detection and are easily mounted, without the need for mounting slots or holes in the cylinder.

For more information on Pepperl+Fuchs sensors, click here.

Eaton’s 10250T Heavy-Duty Pushbuttons

Eaton’s 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die-cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments. 

Motor Control Products


Benshaw’s low voltage soft starters enable precise control and advanced protection for three phase motors and motor-driven equipment, with flexible mounting, enclosure and communication options available to meet your most demanding application requirements. Benshaw’s complete family of variable speed sensorless vector drives includes multi-purpose micro drives, high performance industrial drives, engineered drive packages and custom-engineered drive control systems. Benshaw’s medium voltage motor control solutions offer robust power control and protection features to safely start the heaviest industrial loads. Click here to learn more about Benshaw’s motor control options.


Eaton offers the protection your system needs against equipment failure and danger caused by voltage faults, current conditions or excessive load requirements. Eaton’s extensive line of space saving and easy-to-install electromechanical starters is among the most efficient and effective solution for all customer application needs. For more information from Eaton, click here.

EB Controls Custom Panels

Whether you’re an OEM in need of high volume, repetitive control panels or looking for a custom design and build of a “one-off” panel, EB Controls™ can create a production schedule to meet your deadline. As a fully authorized distributor of some of the leading electrical lines, EB Controls can also offer cost savings opportunities that can keep your project on budget—EB Controls competitive advantage becomes your competitive advantage! To contact EB Controls, click here.


Equipment downtime can impact the productivity throughout a facility. MELTRIC Switch-Rated plugs and receptacles can eliminate lengthy downtimes associated with motor disconnections and replacements. The plug-and-play simplicity of a MELTRIC Switch-Rated connector can reduce motor changeout downtime by as much as 50%.

Conveyor Belts

Beltservice Corporation offers more than 50 separate types of heavy-duty black rubber belt specifications are in stock for cut flat belt or custom-fabricated orders. Beltservice offers a variety of cover thicknesses and can customize belts to provide abrasion and impact resistance, oil and temperature-resisting properties and flame-retardancy.

Beltservice offers a variety of compounds including rubber, nitrile, leather, silicone, butyl, Teflon, PVC and FS covers for most demanding applications. Light Duty belting with cover impressions/profiles are commonly used to prevent back sliding on incline conveyors.

Conveyor Belt Fasteners

No matter what you’re moving, minimizing downtime and maximizing output are always top priorities—and they can be significantly affected by the way you splice your conveyor belts. Flexco mechanical belt fasteners combine strength and durability with affordability and easy installation.

Drum Pulleys

Superior’s drum pulleys are one of the most versatile components of a conveyor system. Depending on their specifications, they can serve in a variety of roles or positions, including drive or head, return or tail, bend tensioning, snub tensioning and/or take-up pulleys, which increase or decrease the amount of slack in your conveyor belt. Click here for more information on Superior’s drum pulleys and lagging options.

Custom Conveyor Rollers

Automatic Lubrication


Groeneveld-BEKA systems lubricate equipment during operation and help grease to spread more efficiently over the surface. By lubricating crucial components, Groeneveld-BEKA systems help to maintain the value of these investments. These benefits make Groeneveld-BEKA systems a smart purchase for equipment longevity, efficiency, productivity and safety. For more information on Groeneveld-BEKA’s automatic lubrication systems, click here.

Perma Star Vario

Perma STAR VARIO operates fully automatically, independent of temperature and very precisely. The system consists of an electromechanical drive unit, a lubricant canister (LC) with a lubricant volume of 60, 120, 250 or 500 cc and a battery pack. The desired discharge period and LC size can easily be selected with the push button and are immediately visible in the display. The current operating status is indicated on the display and via the all around LED signal lights (red/green), which are visible from a distance. Click here for more information on Perma STAR VARIO.

Need Assistance? Contact Us Today For All Your Lumber Needs!

Erie Branch

1432 E. 12th St.
(814) 453-6871
(800) 777-6871
[email protected]

Altoona Branch

3127 Fairway Dr.
(814) 946-5428
(800) 947-5428
[email protected]

Indiana Branch

620 Kolter Dr.
(724) 465-6181
(800) 627-7557
[email protected]

Meadville Branch

959 Bessemer St.
(814) 724-7717
(800) 568-7717
[email protected]

Pittsburgh Branch

514 Parkway View Dr.
(412) 788-1520
(800) 289-3743
[email protected]

St.Marys Branch

768 Washington St.
(814) 834-7402
(800) 678-7402
[email protected]

EB Controls

ErieTec’s Panel Building Division
(814) 878-1512
[email protected]

Reach out to us.

    Input this code: captcha